Quality
We measure the casting and the machined part, and compare the two.
A casting can be in tolerance and still cause trouble in machining if a datum is drifting. Because both inspections happen here, we can trace a machining problem back to the wax die or shell that caused it.
CMM-1: the casting
Every new part, and a sample from every lot, is measured on a bridge CMM before machining. We check against datum pads A, B and C, the same features the machine shop locates on.
CMM-2: the machined part
Machined features are measured on a second CMM after the last operation. Bolt circles, bores and sealing faces are reported against the drawing.
First article (AS9102)
New parts and new revisions get a full first article inspection report before production lots ship.
NDT
Methods, coverage, acceptance criteria and stage per drawing and purchase order, including after final machining when required. Typically fluorescent penetrant, plus radiography on aerospace parts.
Heat and lot traceability
Melt chemistry is recorded by heat number, and every part ships with its heat and lot on the cert.
Certifications (illustrative)
CW Castings is a fictional company, so it holds no real certifications. For the demonstration, it is described as working to AS9100D and ISO 9001, with Nadcap accreditation for NDT and heat treat, and ITAR registration. None of these are real and none should be relied on.